功能说明1.过载指示灯:机器正常工作时过载指示灯为炮灭状态。当本机超声波振动异常时,此灯会亮，并停止发振。如果操作过程中过载灯亮,原因可能有: (1)牌头松动; (2)调波不当; (3)牌头破裂，应对摸施有: (1)锁紧焊头; (2)重新调整声波; (3)换修焊头。2.振幅表:空载时，表示牌头诺振的程度。指针越低越好.视焊头与第出段政而异，通常在5%-15%之间，负载时。表示输出功率的大小。3. LCD显示屏LCD显示有延时时间、焊接时间，冷却时间等。通过它可以很精确的控制机■工作周期。功能按键:设置按键。调模按键。检测按键。开锁按键、启动按键。停止按键。
Function description 1. Overload indicator light: The overload indicator light is off when the machine is working normally. When the ultrasonic vibration of the machine is abnormal, this light will light up and stop vibrating. If the overload light is on during the operation, the reasons may be: (1) The card head is loose; (2) Improper wave adjustment; (3) The card head is broken, and the countermeasures are: (1) Lock the welding head; (2) Readjust Acoustic; (3) Replace and repair the welding head. 2. Amplitude meter: when there is no load, it indicates the degree of vibration of the card head. The lower the pointer, the better. It depends on the welding head and the first section, usually between 5%-15%, when the load is applied. Indicates the size of the output power. 3. LCD display LCD displays delay time, welding time, cooling time, etc. Through it, you can precisely control the machine's working cycle. Function button: set button. Mode adjustment button. Detect button. Unlock button, start button. Stop key.